Connect With Active Sentry
Visit us online: alcon.com
Follow Alcon
ACTIVE SENTRY® maintains stability in the anterior chamber by adjusting for IOP fluctuations3
ACTIVE SENTRY® facilitates operating at lower, more physiological IOP, potentially supporting a comfortable procedure for patients1,4
ACTIVE SENTRY® reduces occlusion break surge, mitigates incision leakage, and automatically adjusts PEL2,5,6
The efficiency of CENTURION® with BALANCED tip* was significantly increased across all lens opacification grades, as compared with longitudinal U/S mode7
The Hybrid tip reduces PCR thanks to its proprietary polymer technology8
ACTIVE SENTRY® has a short learning curve in experienced phacoemulsification surgeons1
1. Cyril D, et al. Active Sentry versus OZil hand piece: A prospective randomized comparative study. J Cataract Refract Surg. 2021;48:328.
2. Miller KM, et al. Experimental study of occlusion break surge volume in 3 different phacoemulsification systems. J Cataract Refract Surg. 2021:47;1466.
3. Vasavada V et al. Real-time dynamic changes in intraocular pressure after occlusion break: Comparing 2 phacoemulsification systems. J Cataract Refract Surg. 2021;47:1205.
4. Kokubun T et al. Verification for the usefulness of normal tension cataract surgery. JOS 2022. Oral presentation.
5. Crandall AS. Role of incision leakage in anterior chamber stability in different phacoemulsifier systems. ASCRS 2019. Oral presentation.
6. Lehmann R. Automated patient eye level by sensor-based handpiece. ASCRS 2019. Oral presentation.
7. Dasgupta S & Mehra R. Comparative studies between longitudinal and torsional modes in phacoemulsification, using active fluidics technology along with the intrepid balanced tip. Indian J Ophthalmol 2018;66:1417-1422.
8. Shumway K et al. Evaluation of the capsular safety of a new hybrid phacoemulsification tip in a cadaver eye model. J Cataract Refract Surg 2019;45:1660-1664.
CENTURION® VISION SYSTEM IMPORTANT PRODUCT INFORMATION
CAUTION: Federal (USA) law restricts this device to sale by, or on the order of, a physician.
As part of a properly maintained surgical environment, it is recommended that a backup IOL Injector be made available in the event the AutoSert® IOL Injector Handpiece does not perform as expected.
INDICATION: The Centurion® Vision System is indicated for emulsification, separation, irrigation, and aspiration of cataracts, residual cortical material and lens epithelial cells, vitreous aspiration and cutting associated with anterior vitrectomy, bipolar coagulation, and intraocular lens injection. The AutoSert® IOL Injector Handpiece is intended to deliver qualified AcrySof® intraocular lenses into the eye following cataract removal.
The AutoSert® IOL Injector Handpiece achieves the functionality of injection of intraocular lenses. The AutoSert® IOL Injector Handpiece is indicated for use with the AcrySof® lenses SN6OWF, SN6AD1, SN6AT3 through SN6AT9, as well as approved AcrySof® lenses that are specifically indicated for use with this inserter, as indicated in the approved labeling of those lenses.
WARNINGS: Appropriate use of Centurion® Vision System parameters and accessories is important for successful procedures. Use of low vacuum limits, low flow rates, low bottle heights, high power settings, extended power usage, power usage during occlusion conditions (beeping tones), failure to sufficiently aspirate viscoelastic prior to using power, excessively tight incisions, and combinations of the above actions may result in significant temperature increases at incision site and inside the eye, and lead to severe thermal eye tissue damage.
Good clinical practice dictates the testing for adequate irrigation and aspiration flow prior to entering the eye. Ensure that tubings are not occluded or pinched during any phase of operation.
The consumables used in conjunction with ALCON® instrument products constitute a complete surgical system. Use of consumables and handpieces other than those manufactured by Alcon may affect system performance and create potential hazards.
AEs/COMPLICATIONS: Inadvertent actuation of Prime or Tune while a handpiece is in the eye can create a hazardous condition that may result in patient injury. During any ultrasonic procedure, metal particles may result from inadvertent touching of the ultrasonic tip with a second instrument. Another potential source of metal particles resulting from any ultrasonic handpiece may be the result of ultrasonic energy causing micro abrasion of the ultrasonic tip.
ATTENTION: Refer to the Directions for Use and Operator’s Manual for a complete listing of indications, warnings, cautions and notes.
© 2023 Alcon Inc. 10/23 US-ASPH-2300012